Glass Suction Cups That Stick To Any Surface [Up To 10 Pounds]
2 Easy Steps On How To Use Our Glass Suction Cups On Any Glass Surface
Suction cups not sticking? Here's how to make suction cups stick better:
1. Prepare and clean the glass surface properly.
2. Use FrogsFeet™ Suction Cups.
Our patented design makes our suction cups stick stronger and stay put longer than typical ordinary suction cups.
How To Stick Suction Cups To Glass Surfaces Every time
If your glass suction cups are not sticking to your glass surface you are probably using an inferior suction cup that's not performing for what they are designed to do! Some glass suction cup manufacturers suggest wetting your suction cup inside the surface or warm your suction cup to get them to work better.
You should not have to do anything! They should just work right out of the package! FrogsFeet Suction Cups for glass surfaces are different in that they have a specially designed polymer seal that conforms and sticks to just about every nonporous surface producing an airtight seal.
The cup body or as we like to call it the “armature” has a matte finish that allows the suction area to extend all the way out to the perimeter seal. This area is much smaller with ordinary suction cups. The increased surface area under vacuum in turn increases the sideways holding power of FrogsFeet. And with a simple tug on the tab, FrogsFeet will peel from the glass surface with little or no residue.
3 Easy Steps To Stick Our Glass Suction Cups
1. Peel Off The Suction Cup.
2. Press Down On The Center.
3. Seal The Entire Perimeter
Do Our Suction Cups To Stick To Windows & Glass Surfaces?
YES! FrogsFeet’s suction cups for glass not only sticks to glass surfaces but it also sticks to other non-porous surfaces. Such as rough surfaces, textured surfaces, and uneven surfaces. Our glass suction cups are able to be used indoor and outdoor glass surfaces in any climate while other ordinary suction cups may not have the strength to withstand multiple season of in-climate weather. Not only that our cup sticks to glass surfaces, they can stick to textured tile, vinyl siding, shower curtains, Christmas lighting, and much much more!
How To Stick Our FrogsFeet™ Suction Cup To Glass
Further proof of FrogsFeet’s suction cups for glass has a uniqueness the manner in which they must be applied to a glass surface: press the center and hold while lifting the tab then run a finger along outer edge firmly. It can support 8 pounds on smooth surfaces & 3 pounds on textured surfaces. Learn more about our suction cup product.
Why Trust FrogsFeet™ And Our Glass Suction Cups
FrogsFeet™ environmentally stable proprietary seal along its circumference will stick to just about any non-porous surface such as glass, smooth or textured, making us one of the best suction cup companies.
These glass suction cups also stay put in temperature extremes because the polymer seal compensates for expansion and contraction of the suction cup and mounting surface.
This suction cup for glass will not let go or slide in moist or wet environments such as bathrooms because the seal keeps moisture from penetrating and entering the interior of the cup. This makes them ideal for prolonged outdoor use, in heat and cold, rain and snow. Regular glass suction cups will fail on all counts! FrogsFeet™ suction cups for glass surfaces is the suction cup manufacturer in the United States you can stick to.
View our Amazon listing for suction cups for glass surfaces that has over 850+ 5 Star reviews!
OUR SERVICES
CONTACT US
